Smart Home PVC-U Drainage Solution Fitting Reducing Bush

Type	D1 (Size mm)	D2	H1	H2	L
III	50	48	33	28	43
III	48	1″	31	29	38
III	48	32	31	29	38
III	60	48	36	30	45
III	75	48	38	33	48
II	75	60	42	38	52
II	110	60	50	38	61
I	110	75	50	38	61
I	160	110	65	56	77
I	110	114	36	34	40

Installation Tips:

Pipe cut must be upright for proper jointing with fitting and a sandpaper should be used to remove burrs from pipe.
Wipe the end of the pipe from inside and outside with clean cloth to remove dirt, grease and/or moisture. Do not apply adhesive until the pipe is clean and dry
The joint surfaces must be softened and remain wet with solvent cement during joint assembly.
A thin coat of the adhesive should be applied inside the fitting and outside the pipe to fill in the gap between the pipe and fittings
Assembly must be made while the surfaces are still wet and the solvent cement is still fluid
Joint strength develops as the solvent evaporate from the joint
Cleaner primer must be used to prime and clean all jointing surfaces, before application of solvent cement. Cleaner primer softens the surface and is essential to a successful jointing process.
No additive of any kind should be introduced to the cleaner primer, or to the solvent cement. Ensure that the solvent cement is in good condition and runs freely with the brush.