Smart Home PVC-U Drainage Solution Fitting Clamps

Pipe Size mm	Thickness	Width	Hexagon Welding nut	Hex Head Bolt	Fisher Bolt	Fisher
60	2.5	20	M8	6*30	8*80	S10
75	2.5	30	M10	6*30	10*100	S12
110	3	30	M10	6*30	10*100	S12

Installation Tips:

Pipe cut must be upright for proper jointing with fitting and a sandpaper should be used to remove burrs from pipe.
Wipe the end of the pipe from inside and outside with clean cloth to remove dirt, grease and/or moisture. Do not apply adhesive until the pipe is clean and dry
The joint surfaces must be softened and remain wet with solvent cement during joint assembly.
A thin coat of the adhesive should be applied inside the fitting and outside the pipe to fill in the gap between the pipe and fittings
Assembly must be made while the surfaces are still wet and the solvent cement is still fluid
Joint strength develops as the solvent evaporate from the joint
Cleaner primer must be used to prime and clean all jointing surfaces, before application of solvent cement. Cleaner primer softens the surface and is essential to a successful jointing process.
No additive of any kind should be introduced to the cleaner primer, or to the solvent cement. Ensure that the solvent cement is in good condition and runs freely with the brush.