Kessel Drainage Solutions Fitting 45 Elbow

Polypropylene (PP) push-fit drainage pipe fitting.

A. Introduction
Compared to the solvent-gluing drainage system, EGIC produced push-fit drainage system made of polypropylene to ensure ease of assembly and insulation. Kessel products include a special seal plugs that tightly grip the pipes when they are inserted into the fitting sockets.

Material: polypropylene (PP) hot water resistant, stabilized light sensitivity
Size: 50mm – 160mm
Pipes Length: 3 meters straight length
Jointing: Push-fit connection
Color: Grey RAL 7037

B. The Advantages of Kessel Push-Fit Drainage System are:

The speed of making a connection with push-fit fittings where plumber can quickly cap or repair
Push-fit fittings are available in various sizes for different kinds of applications
Push-fit fittings are easily removed so they can be re-positioned as needed without specialized tools
Plastic pipe with high flexibility, anti-leakage and chemical resistant

C. Installation Tips

Pipes and fittings are connected by a push-fit socket and sealed tight with sealing ring.
Pipes can be easily cut to fit any length, chamfered and burned, connected and fixed in position.
In horizontal lines, the spacing of pipe clamps must not be more than ten times the outer diameter of the pipe. in vertical lines, spacing should not more than 1 meter (maximum 2 meters)
If the floor is covered with asphalt mastic, exposed pipe should be protected with heat-insulating material.
When Kessel pipes are laid in concrete, the socket gaps should be sealed with adhesive tape in order to prevent penetration of cement grout.